Walkera Dragonfly V200D02 4CH FP CNC Metal Flybarless RC Helicopter RTF 2.4Ghz w/ WK-2403 Tx, 3 Axis Gyro Stablizing Sys.

New 2.4GHz Walkera V200D02, with Flybarless System Rotor Head. New WK-2403 Transmitter and Auto Stabilizing System.

The new helicopter, same size as CB180Z, equipped with 3-Axis Gyro with Auto Stabilizing Technology (AST), and by the meaning of 3-Axis Gyro, it acts like a Co-Pilot for the helicopter, it helps you to keep the helicopter's stability, isn't it amazing? You will feel like you are flying a larger class helicopter. Walkera has done it again, two thumbs up for this new technology!
What exactly a 3-Axis Gyro do?

3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts too much, you will not even notice the system exists. The following diagram will simply tell you more on how it works.

What is flybarless system?

Paddles are doubtless an important component in RC helicopters for a long time, it the aircraft stable. Recently, 3-Axis Gyroscope has been introduced to RC helicopters and this is how Flybarless System has born. The NEW Flybarless System takes away the paddles and flybar, leaving the stabilizing job completely to the high tech 3D Gyroscope. Proven by Helicopter World Champion, result is 100% positive. Without the weight of the flybar and paddles, the helicopter now moves in higher speed, and saves almost 30% energy. Also, less parts means less repair and maintenance!


Features for the NEW Flybarless system:

• Compact flybarless structure, which features lower power loss, remarkably improves efficiency.
• 3-axis gyroscopic flybarless system to simulate the stability of mechanical flybar system, yet at the same time achieving agile 3D performance.
• Flybarless system dramatically improves power output and efficiency, resulting in reduced fuel or electricity consumption.
• Highly sensitive gyroscopic sensors combined with advanced control detection routine providing higher hovering and aerobatic stability than other flybarless system.
• The design of flybarless balance characterizes low power loss and great efficiency improvement.
• Three-Axis-Gyro in receiver control makes the flybarless balance system automatically amend the flight status and provide favorable safety for the beginners.
• Adopting high efficient shaft driven system presents green, environmental friendly and safety concept.
• Low voltage and high torque brushless motor can provides strong and durable power.
• Mini size 4-channel helicopters for indoor. It offers 10-12 minutes flight time after full charged.

Here are some highlight features of the Walkera V200D02

• New Auto Stabilizing 3-Axis Gyro works with NEW RX2437V receiver, give incredibly stable flight
• 2.4G technology, with the functions of identification and precise code pairing, can allow many RC aircrafts to fly in the same field and same time
• Tail Motor Driven Tail Rotor

With the Walkera NEW Transmitter--WK-2403, you can even enjoy much more on the flight!

Highlight Features of Walkera WK-2403:

• The WK-2403 adopts frequency-hopping spread spectrum 2.4G technology and features automatic code pairing and ID assignment.
• Graphic display menu is simple to understand and to set.
• The appearance design accords with ergonomics and features easy holding. The LCD screen with backlight and graphic interface looks more personalized.
• Both the length and tension of the stick can be adjustable. It is convenient to freely switch among the 4 stick modes.
• New! Throttle Limit. This limits the throttle to 30-80%, which limits the height.
• New! Dual Rate Switch. This limits the servo travel to 50% for more stable flight.

• Main Rotor Diameter: 440mm
• Tail Rotor Diameter: 94mm
• Overall Length: 432mm
• Gyro: Three Axis
• All-up Weight: 268g (Including Battery)
• Transmitter: WK-2403
• Receiver: RX2440V
• Battery: 7.4V 1000mAh Li-Polymer Battery
• Main Motor: 370SH motor
• Tail Motor: 1225FC35 motor

	V200D01	V200D02
Overall Length	432mm	432mm
Main Rotor Dia	440mm	440mm
Tail Rotor Dia	121mm	94mm
Main Motor	WK-WS-12-003 Brushless Motor	370SH Brushed Motor
Tail Motor	N/A	1225FC35 Motor
ESC	20A	Built-in
Receiver	RX-2437V	RX-2440V
Battery	7.4V 1000mAh Li-Po	7.4V 1000mAh Li-Po
Gyro	3-Axis Gyro	3-Axis Gyro

• 1 x Walkera V200D02 Helicopter(100% Assembled)
• 1 x WK-2403 Transmitter
• 1 x 7.4V 1000mAh Li-Polymer Battery
• 1 x Charger
• 1 x User Manual

• Dimension: 50 x 19 x 25cm
• Gross Weight: 1.98kg