Skyartec Cessna 182 5CH RC Airplane V2 RTF 2.4GHz w/ Brushless Motor, ESC, Li-po, 5CH TX, 7CH RX (Red)

This is the latest version of CESSNA 182 with 2.4GHz Radio System. Compared with the old version (AP03-4), it has modified battery box, and the plane body has newly equipped with supporting rod, this increases the strength of the plane. Further more, flap is added to the plane body to enhance flight performance on stability.

This 5CH Skyartec Cessna 182 is different from others. This Cessna is equipped with 4 servos not 3 servos as common. It includes everything the beginner needs. Servos and steering levers are mounted and the airplane could be ready for flight within 20 minutes. Furthermore, the plane uses EPS technique for the airframe in order to achieve both smooth surface and best dynamic material properties. The model has a steerable front wheel and uses two servos mounted directly to the main wing roll rudders and the tail wing.

Here are some highlight features of the Cessna 182

• SKY703 2.4GHz 7ch Transmitter and Receiver Radio Controlled
• Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible
• State of the art components such 1530KV Brushless Outrunner High Torque Motor, Sensorless 25A Speed Control, and 1100mah 11.1 Volt Li-Po Battery Pack
• Rudder helps steer plane on ground on its scale landing gear for easy take off
• Ready to Fly in Just Minutes!
• Quick assembly
• Super tough, lightweight airframe!
• Perfect appearance and emulation (Scale appearance, great attention has been given to details)
• Shock Resistant Reinforced Fuselage and Strong Wings
• Can Take Off From Ground or Hand Launched
• Ground Take-Off can be performed easily
• Huge Wing size, Excellent Flight Performance
• Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users
• Stable inverted flight
• Fuselage with pre-installed electronics and brushless motor
• Superb Quality, Simply the Best RTF Plane you can find!!!
• Super stable for beginner, Super low speed for safety, Super low altitude for fun
• Fabricated by accurate molds with high fidelity of real airplane
• One of the Best Looking Plane in the market
• Excellent stability and aerobatic capability
• Detailed Body Structure
• High roll rate
• Digital Proportional Motor Speed Control
• Crash Resistant Construction
• Easy to Fly, Easy to Control, Super stable for beginner
• Slow Speed Flying Capable, Good for Beginner
• Suitable for both beginners and experienced pilots
• Best choice for Beginner - Advanced pilots
• Simulator Kit and Software included (Practice flying airplanes and helicopters on your computer)
• Approximately 20 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
• All spare parts and accessories are available
• Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 80% assembled -- only required 8 AA batteries for the transmitter to start flying)

• Wingspan: 980mm (38.6 inch)
• Overall Length: 780mm (30.7 inch)
• Flying Weight: 560g (19.8 oz)
• Drive System: 1530KV Brushless Outrunner High Torque Motor
• ESC: Brushless 25A Speed Controller
• Servo: 4X 9g high speed micro servos
• Battery: 11.1V 1100mah Li-Polymer
• Control system: sky703 2.4GHz 7ch Transmitter and Receiver
• Radio Control Range: 3000 feet (1000m)

• Airplane (80% assembled) x 1
• SKY703 7CH 2.4GHz Transmitter x 1
• 7CH 2.4GHz Receiver x 1
• Wall Battery Charger x 1
• High Quality Rechargeable 11.1V 1100mah Li-Polymer Battery x 1
• BONUS Simulator Kit and Software (Practice flying airplanes and helicopters on your computer) x 1
• English Manual x 1

• 8 x AA Dry Cells For Transmitter

• Dimension (Unit): 104 x 24 x 18cm
• Gross Weight (Unit): 2,560g