Real Time Li-Polymer Battery Tester

Rapidly shows the voltage of each cell of Li-Polymer batteries. This mini device can test batteries with 2 to 6 cells. Extra micro size and light weight with dimension 40 x 30 x 8mm and weights only 8g. Convenient to carry to field. Suitable for testing all hobby Li-Po batteries (2S-6S).

The main purpose of the Li-Polymer Battery Voltage Tester is to test the efficient voltage, suitable for batteries with 2-6 cells.




It is also used for the following purpose:

Testing the working balance effectiveness of a balance Li-Po charger
To test it, you can connect the device directly to the charger output and switch on the charger. The accuracy is ±0.02V. For some batteries, they are only allowed to be charged up to 4.15V, to achieve this, charging has to be stopped in appropriate time.

To test The discharge rate when fully charged, that is the "C"
In this case, connect the device to the parallel port of a dynamical system, or a motor system, when the motor system is running in full power, you can notice the decrease in voltage. Say the voltage drops below 3.3V within 1 minute, this indicates that the battery is overloaded. If one of the cells discharges in a unusual rate, then you have to be careful that the battery may have problem.

To test if the battery is dead
If the display shows "NO" for a group of battery, then you have to check whether there is a problem in the plug or the battery.

• Accuracy: ±0.02V
• Suitable for: All hobby Li-Po Batteries (2S-6S)
• Dimension: 40 x 30 x 8mm
• Weight: 8g

• 1 x Real Time Li-Polymer Battery Tester