Nine Eagles 318A Solo Pro 180 3D 6CH RC Helicopter RTF 2.4GHz w/ Gyro (Yellow)

Here comes the latest release from the Nine Eagles Factory -- The Solo Pro 180 3D (Model number: 318A). The factory has been developing better and better technology, now not only 4CH helicopters, this new model applies the 6CH 3D flight technology with the flybarless structure.


To take away the flybar from a helicopter is not an easy job. This needs high technology, it requires sensitive electronics to detect the motion and make adjustment to balance the helicopter body. Yes, in this Solo Pro 180, there is a 3-Axis Gyro, which works with micro servos and high performance brushless main motor. The collective pitch flybarless rotor head changes blade pitch responds quickly to your throttle input. All these work together, makes it possible to fly outdoor, though it is small in size when comparing other out door helis. The 3-Axis Gyro compensates the heli drifting problem and helps a lot on stablizing the helicopter. At the same time , the brushless main moto gives high RPM for the rotor head, this also help the heli to cope with gentle wind outdoor.



What exactly the 3-Axis Gyro do?

3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts to much, you will not even notice the system exists, please take a look at the following picture.


The nine eagle factory had produced many small scale helicopters, and they have gained much experience on it. The Solo Pro 180 uses a lot of high quality plastics to make up the helicopter parts. Parts like main frame, main rotor blades and landing skid are made of durable plastic , this reduce much weight and light weight is important for small size helicopters. The durability also makes it less likely to be broken.

So you can see the nine-eagle solo pro 180 is a good starting model for 3D aerobatic flight. It's size is just good fit. Small enough for indoor flight, also large enough to fly outside. Also look at the simple structure of the helicopter, this means easy to repair.

The Solo Pro 180 uses the new Transmitter J6 Pro, which is newly designed for 6CH helicopters. The 2.4GHz radio system allows several helicopter to fly in same area with almost zero interference. With large LCD display, Mode 1 and Mode 2 inter-changable, adjustable pitch curve and dual rates.

• Model No.: NE 318A
• NE-T008 (J6 Pro 6CH 2.4GHz Transmitter)
• Main Blade Diameter: 318mm
• Total Length: 360mm
• Weight: 105g
• Main Motor: High performance Brushless Motor
• Battery: 3.7V 680mAh Li-Polymer Battery

• Solo Pro Helicopter x 1 (100% Assembled)
• J6 Pro 6CH Transmitter x 1
• Charger x 1
• Charging adapter x 1
• Li-Polymer battery x 1
• Screwdriver x 1

Per Unit

• Dimension: 35 x 26 x 20cm
• Gross Weight: 1,500g