USD121.59 - Hobbywing XERUN 150A SD Brushless ESC For 1/5 Car : ESky TWF RC Helicopters, honey bee, honey bee king 3, belt cp v2, lama 3, lama 4

Please enable javascript in your browser to experience all the custom features of our site, including the ability to make a purchase.

Home :: Upgrade Parts :: Electronic Speed Controller :: Car ESC :: HOBBYWING-XERUN-150A-V1

Product 20/26

Hobbywing XERUN 150A SD Brushless ESC

Here are some highlight features of the Hobbywing eZRun 150A SD Brushless ESC

Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
Excellent start-up, acceleration and linearity features.
3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment by software.
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Easily program with only one button and compatible with pocket-sized Program Card.
Firmware can be updated through an USB adapter (Optional equipment).
Splash proof and dustproof.
Stable and reliable.

For detail information, please read the user manual for reference.

Continues Current: 150A
Max Current: 950A
Input Power: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.
BEC: 5.75V/3A (Switch mode built-in BEC)
Resistance: 0.0002 Ohm
Motor Supported: Sensorless and sensored brushless motors
Suitable Brushless Motor:
When working with 4 cells Lipo: >= 4.5T (KV < =3000)
When working with 6 cells Lipo: >= 6.0T (KV < = 2400)
The above T number is the value of a 4274 sized motor (Diameter=42mm, Length=74mm)
Suitable Car: 1/8 Buggy / Truggy / Monster for competitive race.
Weight: 105g
Dimensions: 58 x 46.5 x 35mm