Futaba Analog Standard Ball Bearing Servo 45g 2.4kg 0.28s FUTM0029

This is a Standard Servo with a Ball Bearing on the output shaft.
This has a "J" connector and uses a nylon gears.

This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.

Here are some highlight features of the Futaba S3001 Servo Standard Ball Bearing

• Single Top Ball Bearing
• Same mounting as S148 and S9201 (individual rectangular grommets)
• 3-pole motor
• Nylon gears

• Speed @ 4.8V: 0.28 sec/60°
• Speed @ 6.0V: 0.22 sec/60°
• Torque @ 4.8V: 33 oz-in (2.4kg/cm)
• Torque @ 6.0V: 42 oz-in (3.0kg/cm)
• Weight: 1.6oz (45g)
• Dimensions: 40 x 20 x 36mm

• 1 x S3001 Standard Servo
• 1 x Accessory Package