Esky Honey Bee CP3 (Black) 6CH CCPM RC Helicopter RTF 2.4GHz (002437)

The original Esky Honey Bee CP2 was without doubt one of our more popular models for beginners who wanted a trainer model that was more of a challenge than the basic 4ch fixed pitch Honey Bee.

The new Esky Honey Bee CP3 comes with a Li-PO battery as standard meaning flight times of 5-10 minutes; the model is available with the latest 2.4GHz technology, high speed digital servos all as standard.The Honey Bee CP3 is a great challenging beginner’s model for someone who wants a trainer model that can be used outdoors apposed to the Co-axial models that are solely for indoor use.

What's the difference between CP3 and CP2?
Other than the obvious aesthetic differences, the CP3 has a totally different design. For example, the landing skids and frame have undergone massive improvements making the heli far more durable. All the improvements combine to basically give a stronger and better flying helicopter. The CP3 also comes complete with an upgraded GHz transmitter as standard, offering greater range, greater reliability and a lower power consumption. The CP3 shares most of the parts with Honey Bee V2 , this keeps the cost of spares down!

The Esky Honey Bee CP3 is also a good step up from the Co-Axial range of helicopters and will push your skills to the next level.

The Honey Bee CP3 comes with everything you need to start flying including transmitter, battery and charger.

Here are some highlight features of Honey Bee CP3:

• A direct drive tail system provides incredible power and response for tail commands, all while eliminating tail rotor gears for greater efficiency and less maintenance.
• 370 super motor provides super power for high performance flight. Simple mechanical structure design, easy maintenance.
• Durable Material, capable of bearing most crashes without any damage.
• High performance main rotor blade significantly increase their strength for performing advanced 3D maneuvers.
• Helpful in practicing professional 3D aerobatic flight .
• Fully assembled and tested in the factory, ready to fly out of box .

Adjustable Pitch Control System, stainless steel Fly Bar.	The High-power strong magnetism motor equipped with high-efficient radiator is dynamical and effective.
The airplane frame featured simple design and practical use; it can effectively avoid damage from falls and breaks.	The Motor control system directly controls the tail rotor blade and has a good head-lock function.

• Main rotor diameter: 540mm
• Length: 525mm
• Height: 185mm
• Weight: 4104g
• Power system: SUPER 370 motor + CN12 motor
• KIT/ARF/RTF: RTF
• Control mode: normal
• Transmitter: Standard 6 CH 2.4GHz!!
• Receiver: Standard 6 CH 2.4GHz!!
• Mix controller: 3 in 1 controller (gyro, mixer, ESC)
• Servo: EK2-0508/000155 digital servos
• Battery: 11.1V 1000mAh li-polymer battery

*Check our "School" for the configuration of Transmitter with different Modes:
Esky 2.4GHz Transmitter Configuration For Different Modes

*Check our "School" for the binding method of Transmitter:
Binding and Unbind an Esky Transmitter

	Honey Bee V2	Honey Bee CP2	Honey Bee CP3
Overall Length	510mm	520mm	525mm
Main Motor	370 motor	370 motor	SUPER 370 motor+ CN12 Motor
Controller	4 in 1 Mix Controller	4 in 1 Mix Controller	3 in 1 Mix Controller
Receiver	Built in 4 in 1 Mix Controller	Built in 4 in 1 Mix Controller	6ch Receiver (EK2-0426/001367)
Battery	Li-Po 11.1V 800mAh	Li-Po 11.1V 1000mAh	Li-Po 11.1V 1000mAh
Servo	7.5g x 2	7.5g x 4	7.5g x 3
Transmitter	4 ch 2.4GHz	old 6 ch 2.4GHz (EK2-0406I)	Upgraded 6 ch 2.4GHz (EK2-0406J)

• 1 x Helicopter Body
• 1 x 3-in-1 controller (with Gyro, mixer, ESC) (ESKY-002496)
• 1 x Transmitter: 2.4GHz 6CH ET6 EK2-0406I (000988/001726) *Transmitter battery is not included.
• 3 x Digital Servo 7.5g.(EK2-0508/000155)
• 1 x Battery: 11.1V 1000mAh Li-polymer battery
• Charger

• AA Size Battery x 4 (for transmitter)

Packing Box Size for ONE unit:

• Box Size: 58.4 x 25.5 x 18.5 cm
• Gross Weight:2250 g